China Self-Feeding Tractor Pto Driven Wood Mulcher Chipper pto shaft adapter tractor supply

Merchandise Description

Item Introduction 
The WC68  hydraulic vehicle-feed wood chipper is a sturdy self-feeding PTO pushed wooden chipper attachment that mounts to the 3-level hitch of your tractor. This PTO woodchipper is compact, but created to stand up to business use. Twin powered infeed rollers seize and pull material into the chipper head using 2 potent hydraulic motors. These motors are powered by the chipper’s self-contained hydraulic pump and tank.

Specification 

Design WC68
Drive System Tractor PTO
Max. Chipping Diameter 150mm/ 6”
Tractor Needed (at the PTO) 20-50HP
Hydraulic Oil 19 L / 5 gallons of ISO 32 or ISO 46
Hydraulic Pump Belt pushed
Flywheel Diameter/Thickness 24″ x 3/4″ thick (61cm x 2. cm thick)
Flywheel Speed 540 RPM
Flywheel Travel System Immediate drive
Flywheel Housing Layout Straightforward To open clamshell
(for effortless clean out and blade changes)
Flywheel Housing Thickness 5/sixteen” (8mm) Thick
Flywheel Shaft two” (50mm) Diameter
Variety of Blades 4 Reversible blades
In-feed Program Self-contained hydraulic program
In-feed Push Ahead/Neutral/Reverse with variable speed
(-seventy five ft-min) / (23 m/min)
In-feed Roller Measurement 8.twenty five” (21cm) Chisel tooth
In-feed Opening 6″ tall x 8″ vast (15cm x 20cm)
In-feed Roller Strain Adjustable by means of spring tension
Rapid Hitch Suitable Indeed
Discharge Chute 360 Diploma swivel
Packing size 1120x870x1120mm
Weight 322/374 kg
forty” Container 52pcs

Features 

(8.25″) 21mm chisel tooth in-feed roller that easily climbs up and grabs the branches to bite in and successfully pull the content into the flywheel at up to 58 ft./min.The greater the roller, the simpler it rolls in excess of the material. CZPT WC68 car feed wooden chippers make use of in-feed rollers with substantial carbon metal chisel tooth. This sort of in-feed roller is discovered on greater, a lot much more expensive equipment.

Effortless SWIVEL DISCHARGE CHUTE

 It effortlessly enables you to swivel the discharge chute so that you can direct the chips into the back of a truck or trailer with no obtaining to transfer the whole equipment. Simply press down on the deal with and swing the chute.

Fast HITCH Compatible

Dural flywheel to energy the chipper 

The valve to modify the infeed speed 

PTO SHAFT 

 

US $1,700
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Yes
Warranty: 1 Year
Type: Wood Chipper
Power Source: Hydraulic
Certification: CE
Model: Wc68

###

Customization:

###

Model WC68
Drive System Tractor PTO
Max. Chipping Diameter 150mm/ 6”
Tractor Required (at the PTO) 20-50HP
Hydraulic Oil 19 L / 5 gallons of ISO 32 or ISO 46
Hydraulic Pump Belt driven
Flywheel Diameter/Thickness 24" x 3/4" thick (61cm x 2.0 cm thick)
Flywheel Speed 540 RPM
Flywheel Drive System Direct drive
Flywheel Housing Design Easy To open clamshell
(for easy clean out and blade changes)
Flywheel Housing Thickness 5/16" (8mm) Thick
Flywheel Shaft 2" (50mm) Diameter
Number of Blades 4 Reversible blades
In-feed System Self-contained hydraulic system
In-feed Drive Forward/Neutral/Reverse with variable speed
(0-75 ft-min) / (23 m/min)
In-feed Roller Size 8.25" (21cm) Chisel tooth
In-feed Opening 6" tall x 8" wide (15cm x 20cm)
In-feed Roller Pressure Adjustable via spring tension
Quick Hitch Compatible Yes
Discharge Chute 360 Degree swivel
Packing size 1120x870x1120mm
Weight 322/374 kg
40" Container 52pcs
US $1,700
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Yes
Warranty: 1 Year
Type: Wood Chipper
Power Source: Hydraulic
Certification: CE
Model: Wc68

###

Customization:

###

Model WC68
Drive System Tractor PTO
Max. Chipping Diameter 150mm/ 6”
Tractor Required (at the PTO) 20-50HP
Hydraulic Oil 19 L / 5 gallons of ISO 32 or ISO 46
Hydraulic Pump Belt driven
Flywheel Diameter/Thickness 24" x 3/4" thick (61cm x 2.0 cm thick)
Flywheel Speed 540 RPM
Flywheel Drive System Direct drive
Flywheel Housing Design Easy To open clamshell
(for easy clean out and blade changes)
Flywheel Housing Thickness 5/16" (8mm) Thick
Flywheel Shaft 2" (50mm) Diameter
Number of Blades 4 Reversible blades
In-feed System Self-contained hydraulic system
In-feed Drive Forward/Neutral/Reverse with variable speed
(0-75 ft-min) / (23 m/min)
In-feed Roller Size 8.25" (21cm) Chisel tooth
In-feed Opening 6" tall x 8" wide (15cm x 20cm)
In-feed Roller Pressure Adjustable via spring tension
Quick Hitch Compatible Yes
Discharge Chute 360 Degree swivel
Packing size 1120x870x1120mm
Weight 322/374 kg
40" Container 52pcs

Safety Precautions For a PTO Shaft

When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Shaft Collar

Safety precautions

One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.

Types of pto shafts

PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Shaft Collar

Reaction time

It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.

Standardization

The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Shaft Collar

Safety chains

The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.

Shield

The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
China Self-Feeding Tractor Pto Driven Wood Mulcher Chipper     pto shaft adapter tractor supplyChina Self-Feeding Tractor Pto Driven Wood Mulcher Chipper     pto shaft adapter tractor supply
editor by czh 2023-01-01